Pulse GSM Gateway Manual de usuario descargar pdf (Pagina 40)

Table of Parameters 3.2

COM enable Function No.: 50

With this parameter you can enable/disable the serial interface function. You can

disable communication in the operating mode, maintaining the special

programming mode after power up.

Setting options: YES/NO

Default setting: YES

Time period for GGMC SMS [h] Function No.: -

Time interval for GGMC SMS sending. GGMC = GSM Gateway Monitoring Centre.

The "0" setting means that the function is disabled.

Setting options: 0-255 h

Step: 1 h

Default setting: 0

Telephone number for service SMS Function No.: -

Telephone number for service SMS. The number is common for GGMC SMS and

"LOW CREDIT" SMS on prepaid SIM cards.

Setting options: 0-16 characters (0-9,*,#,+)

Default setting: blank

Initialization

All programmable parameters are arranged in tables according to their functions. You

can initialize either all parameters at once or one table of parameters.

For initialization via a telephone line fill in the function number according to the type

of initialization and enter the service password as the parameter.

Telephone line initialization Function No.: 91

Initialization of all parameters necessary for the telephone line function.

Call table initialization Function No.: 92

Initialization of all parameters related to dialed telephone number.

Initialization of GSM & SIM Function No.: 94

Initialization of all parameters related to the GSM network and SIM card (except

for the PIN code).

SMS input initialization Function No.: 93

Initialization of all parameters for SMS sending upon SMS input activation.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 68 69

Sin comentarios

Pulse GSM Gateway Manual de usuario Pagina 40