Pulse DuMV@PCI Guía de usuario descargar pdf (Pagina 70)

100

64 CHAPTER 6: TECHNICAL REFERENCE

Top-of-the-Case

Lights (Voice

Faxmodem Pro

Externals)

Typing Commands

■ Type commands in either upper or lower case, not a combination. Use

the Backspace key to delete errors. (You cannot delete the original AT

command.)

■ If a command has numeric options and you don't include a number,

zero is assumed. For example, if you type ATB, the command ATB0 is

assumed.

■ Every command except A/, +++, and A> must begin with the AT prefix

and be entered by pressing ENTER.

All defaults are based on the &F1*Hardware Flow Control template

loaded in NVRAM when the modem is shipped. Defaults are listed in

italics.

Basic Data

Commands

<control key>S

Stop or restart help screens.

ARQ/Error

Control/FAX

Fax Operations

Data Mode

Error Control. ON if modem

is set to &M4 or &M5 and

successfully establishes an

error control connection.

Flashes when modem

retransmits data to remote

modem. Fax Mode: flashes

to indicate fax mode.

Symbol Meaning Status

Light What It Means When Lighted

POWER The modem is turned on.

SEND The computer is sending a data bit

to the modem.

RECEIVE The modem is sending result

codes or passing received data bits

from the remote.

ONLINE The modem is online. (NOTE: This

light blinks when the mute feature

is being used.)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 99 100

Comentarios a estos manuales

Sin comentarios

Pulse DuMV@PCI Guía de usuario Pagina 70

Comentarios a estos manuales