Pulse DuMV@PCI Manual de usuario descargar pdf (Pagina 19)

-15-

(2) VoIP Rx Gain: To adjust the volume of Mobile side.

(3)LAN Dialtone Gain: DTMF Reciver is not good,you can adjust gain

down.

(4) ON/Off: If you use this channel,please click on. Otherwise,please

click off.

(5)CODEC Tx Gain: as above

(6)CODEC Rx Gain: as above

(7) SIP From: Caller ID transfer

 Tel/User(Standard): If you need to register to Asterisk and proxy

server,please choose this option. And how to transfer the caller ID

to LAN,please refer 21.How to setup Asterisk to receive Caller ID

from DuMV@PCI (page 42)

DuMV@PCI will send the message as follows in the Packet.

From: " caller number " <sip:3001@192.168.0.228>;tag=51088abb

 Tel/Tel :

DuMV@PCI will send the message as follows in the Packet.

From: "caller number" <sip: caller number @192.168.0.228>;tag=6ac93f7c

※Please note:If you choose this option,please don’t register to

Asterisk and proxy server. Please only fill proxy server ip and

choose Active: on (else field empty) in sip setting/service demain

 User/Tel

DuMV@PCI will send the message as follows in the Packet.

From: " Username " <sip: caller number @192.168.0.228>;tag=7f130947

※If you choose this option,please don’t register to Asterisk and

proxy server. Please only fill proxy server ip,Username and

choose Active: on (else field empty) in sip setting/service

demain

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 60 61

Sin comentarios

Pulse DuMV@PCI Manual de usuario Pagina 19