Pulse GSM Gateway Manual de usuario descargar pdf (Pagina 17)

3.8. Signalling LED lamps

3.8.1. Charts – basic functions of LED lamps

Fig.12: Signalling LED lamps

Status of LED lamps for ISDN

Each of the two lines of opposite direction (TE1/NT1 ; TE2/NT2) has a LED lamp of its own to

indicate the status of B channels on the line.

Status BRI ISDN Line Colour / Status of LED diode

Free Light off

1. B-channel busy Green / light on BRI1

2. B-channel busy Green / light on BRI2

TE1 / NT2 not connected Red / Light BRI2

Statuses of LED lamps for GSM

Each module has a LED lamp of its own to indicate its status.

Module status LED GSM 1 and GSM 2 Colour / Status

Module not available GSM 1 and/or GSM 2 Red on

Wrong firmware in module Both GSM module LEDs Orange flashing slowly 1:1

Module programming Both GSM module LEDs Orange on

No SIM inserted GSM 1 and/or GSM 2 Red flashing slowly 1:3

PIN request GSM 1 and/or GSM 2 Red flashing slowly 1:1

PUK request GSM 1 and/or GSM 2 Red flashing quickly 1:1

Module looking for network GSM 1 and/or GSM 2 Green flashing slowly 1:3

Module logging into network GSM 1 and/or GSM 2 Green flashing quickly 1:1

Module logged in network GSM 1 and/or GSM 2 No light

Active call of the module GSM 1 and/or GSM 2 Green on

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 62 63

Sin comentarios

Pulse GSM Gateway Manual de usuario Pagina 17